OPW 45-5060 Swivel MF, 3/4″

#ad
#ad
OPW 45-5060 #ad - Unique two planes of rotation for easy nozzle positioning and hose life. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. The 45 is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer. The opw 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience.

50 psi 3. 45 bar maximum pressure. Better flow performance - less restriction means higher refueling speeds.

More information about OPW 45-5060 #ad

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush

#ad
#ad
Federal Process SS04 #ad - Non-hardening, non-toxic paste with PTFE. Use on threaded brass, copper, stainless steel, pvc nylon and galvanized pipe threads, aluminum, polybutylene, ABS, black pipe, tin, polyethylene, polypropylene, hoses and more. Not for use on oxygen systems. Excellent resistance to gasoline, potable water, acids, ammonia, kerosene, petroleum solvents, LPG, aliphatic solvents, butane, cutting oils, diesel oil, up to 20 percent alcohol and petroleum blends, propane, steam, compressed air and more.

Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit. Premium pipe thread sealant with PTFE. Provides a positive seal on pipe thread, housings, oil burners, pump assemblies, compressors, fuel lines, LPG cylinders, engines, hoses, fittings, joints, plugs, nozzles, hydraulics, motors, couplings and more.

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush #ad - Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases.

More information about Federal Process SS04 #ad


Similar products



OPW 11BP-0400 3/4" NPT Gasoline Nozzle, 11BP, Black

#ad
#ad
OPW 11BP-0400 #ad - Non-hardening, non-toxic paste with PTFE. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device. Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.

Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. Durable lever guard that won't scratch your customers' vehicles. The opw 11bp will not open until the pumping system is pressurized, and closes automatically when the pressure is removed.

Use on threaded brass, polyethylene, pvc nylon and galvanized pipe threads, stainless steel, copper, polybutylene, tin, aluminum, ABS, black pipe, polypropylene, hoses and more. Not for use on oxygen systems. From the manufacturer the opw 11 Series automatic nozzles are OPW's premium conventional nozzles for safe retail and commercial petroleum filling.

OPW 11BP-0400 3/4" NPT Gasoline Nozzle, 11BP, Black #ad - . Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit. The opw 11bp series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills.

More information about OPW 11BP-0400 #ad


Similar products



Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose

#ad
#ad
Tuthill FRH07520 #ad - This product is manufactured in USA. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device. This product adds a great value. Product is highly durable and very easy to use. Non-hardening, non-toxic paste with PTFE. We use only the most durable materials to insure long life and dependability.

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. Durable lever guard that won't scratch your customers' vehicles. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.

Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit.

Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose #ad - Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation. Use on threaded brass, copper, polypropylene, aluminum, black pipe, polybutylene, tin, stainless steel, ABS, pvc nylon and galvanized pipe threads, polyethylene, hoses and more.

Not for use on oxygen systems.

More information about Tuthill FRH07520 #ad


Similar products



OPW 66V-0300 Breakaway Valve with 300# shear pins, 3/4"

#ad
#ad
OPW 66V-0300 #ad - Installed on fuel dispensing hoses, they will separate a the designed pull force, reducing expensive damage to the dispenser and piping system. This product adds a great value. Product is highly durable and very easy to use. No more than 300 lb. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.

Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. Durable lever guard that won't scratch your customers' vehicles. 50 psi maximum pressure. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.

OPW 66V-0300 Breakaway Valve with 300# shear pins, 3/4" #ad - Aluminum body, Buna-N and Viton Seals. This product is manufactured in USA. Non-hardening, non-toxic paste with PTFE. 66v series breakaways must always be installed with a "straightening" hose with a minimum length of 9" for the 3/4" series. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology.

Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device. 3/4"f x 3/4"f npt connections.

More information about OPW 66V-0300 #ad


Similar products



OPW 66REC-1000 Breakaway Reconnectable, 3/4"

#ad
#ad
OPW 66REC-1000 #ad - When reconnecting the separated halves, the 66REC seals tightly on an O-Ring before the poppet stems engage to open the valve. The 66rec will breakaway with a pull force of no more than 350 lbs. Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. 50 psi maximum pressure. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions.

This product is manufactured in USA. It is designed to be installed on fuel dispensing hoses and will separate when subjected to a designated pull force. The dual valves seat automatically, stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. Aluminum body, Buna-N and Viton Seals.

OPW 66REC-1000 Breakaway Reconnectable, 3/4" #ad - Pull force. Non-hardening, non-toxic paste with PTFE. For proper operation on high-hanging hoses, the opw 66REC 3/4" must always be installed with a "straightening" hose with a minimum length of 9", such as the OPW 66H. Product is highly durable and very easy to use. No more than 300 lb. This product adds a great value.

More information about OPW 66REC-1000 #ad


Similar products



Husky 159404N-04 New X Unleaded Nozzle with Three Notch Hold Open Clip and Full Grip Guard

#ad
#ad
Husky 159404-04 #ad - The 66rec will breakaway with a pull force of no more than 350 lbs. No more than 300 lb. Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip end sensor damage. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. 3/4"f x 3/4"f npt connections.

Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device. Use on threaded brass, black pipe, polyethylene, ABS, stainless steel, copper, aluminum, polybutylene, tin, pvc nylon and galvanized pipe threads, polypropylene, hoses and more. Not for use on oxygen systems.

Husky 159404N-04 New X Unleaded Nozzle with Three Notch Hold Open Clip and Full Grip Guard #ad - Durable lever guard that won't scratch your customers' vehicles. This product is manufactured in USA. Product is highly durable and very easy to use. Equipped with a unique flo-stop TM device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Die-cast zinc body, stainless Steel main spring, impact resistant nylon protective sleeves, Viton main seals, Acetal guide and poppets.

New unleaded nozzles with three notch hold open clip. Aluminum reinforced spoutbushing keeps spout tip round and acts as a captive fastener to prevent tip end sensor damage. Easily reconnected - just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected.

More information about Husky 159404-04 #ad


Similar products



Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle

#ad
#ad
Tuthill N075DAU10 #ad - Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Product is highly durable and very easy to use. Use on threaded brass, aluminum, black pipe, polyethylene, ABS, stainless steel, copper, polypropylene, polybutylene, pvc nylon and galvanized pipe threads, tin, hoses and more. Not for use on oxygen systems.

66v series breakaways must always be installed with a "straightening" hose with a minimum length of 9" for the 3/4" series. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Aluminum reinforced spoutbushing keeps spout tip round and acts as a captive fastener to prevent tip end sensor damage.

Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle #ad - Aluminum for resistance to corrosion and tarnishing. Aluminum body, Buna-N and Viton Seals. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. This product is manufactured in USA. No more than 300 lb. Automatic nozzle with a 3/4" unleaded or 1" leaded spout. Durable lever guard that won't scratch your customers' vehicles.

For use with 1200, 700 and FR600 series pumps. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.

More information about Tuthill N075DAU10 #ad


Similar products



OPW7HB-0100 Diesel Nozzle, 1", Green

#ad
#ad
OPW 7HB-0100 #ad - Reconnection force approximately 15 lbs. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. This product is manufactured in USA. 3/4"f x 3/4"f npt connections. Flow lock allows nozzle to shut-off when falling out of a vehicle and tipped up limiting spillage and unsafe conditions. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.

Stream shaper reduces turbulence for straighter fuel flow and less splashback spillage. 66v series breakaways must always be installed with a "straightening" hose with a minimum length of 9" for the 3/4" series. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. No more than 300 lb. Easily reconnected - just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected.

OPW7HB-0100 Diesel Nozzle, 1", Green #ad - Durable lever guard that won't scratch your customers' vehicles. Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. Use on threaded brass, stainless steel, polybutylene, polyethylene, ABS, copper, aluminum, pvc nylon and galvanized pipe threads, tin, black pipe, polypropylene, hoses and more.

Not for use on oxygen systems. Product is highly durable and very easy to use.

More information about OPW 7HB-0100 #ad


Similar products



OPW66V1300 - OPW 66 1" Breakaway

#ad
#ad
OPW #ad - Automatic shut-off nozzle for full-service and self-service stations. Aluminum for resistance to corrosion and tarnishing. Automatic Shut Off Nozzle. For heavy-duty, high-Flow Truck, Bus and Fleet Service. Pull force - the 66v-0300 will break away with a pull force less than 300 lbs. Certainty of operation - designed to be replaced after separation, instead of reassembled, to protect against reassembly errors.

50 psi. 1" female x 1" female NPT Ends. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. Equipped with a unique flo-stop TM device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Coupling halves protected by proven plastic sleeves.

OPW66V1300 - OPW 66 1" Breakaway #ad - Durable lever guard that won't scratch your customers' vehicles. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Pull force. This product adds a great value. Non-hardening, non-toxic paste with PTFE. Ul listed.

More information about OPW #ad


Similar products



GOLDENROD 496-5 Fuel Tank Filter Replacement Water-Block Element

#ad
#ad
GOLDENROD 496-5 #ad - Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Automatic shut-off nozzle for full-service and self-service stations. 3/4"f x 3/4"f npt connections. 66v series breakaways must always be installed with a "straightening" hose with a minimum length of 9" for the 3/4" series.

Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Water-absorbing bowl fuel tank filter replacement element. Pull force - the 66v-0300 will break away with a pull force less than 300 lbs. Certainty of operation - designed to be replaced after separation, instead of reassembled, to protect against reassembly errors.

GOLDENROD 496-5 Fuel Tank Filter Replacement Water-Block Element #ad - 50 psi. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. This product adds a great value. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device.

Automatic Shut Off Nozzle. Viton seals for resistance to heat and chemicals. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. Die-cast zinc body, stainless Steel main spring, Viton main seals, impact resistant nylon protective sleeves, Acetal guide and poppets.

More information about GOLDENROD 496-5 #ad


Similar products